View MT2063_4223246.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

RF SILICON AND SUBSYSTEMS SOLUTIONS FOR BROADBAND COMMUNICATIONS AND AUTOMOTIVE ELECTRONICS
MT2063 SINGLE-CHIP UNIVERSAL TUNER
PRELIMINARY PRODUCT BRIEF The MT2063 is a low-power 3.3V singlechip universal tuner for analog and digital worldwide terrestrial and cable standards
MT2063 Single-Chip Universal Tuner
The MicroTunerTM MT2063 is an advanced, low-power single-chip tuner, optimized for terrestrial and cable television reception. The MT2063 is capable of receiving frequencies in the 48 MHz to 1002 MHz range. It can convert a selected channel to a standard intermediate frequency (IF) between 30 MHz and 60 MHz. The MT2063 dual-conversion architecture yields the desirable characteristics of traditional television tuners without the need for external tracking filters. This is achieved by an integrated preselection filter at the RF input, low in-band emissions and outstanding image rejection The MT2063 has a high level of integration to keep the total Bill of Materials (BOM) low. It supports multiple digital terrestrial television standards including ATSC, DVB-T, DMB-T and ISDB-T. In addition, MT2063 supports 256QAM reception as it is used in world wide digital cable networks and analog NTSC, PAL and SECAM signals. It provides excellent in-band flatness as well as consistent gain characteristics across the complete reception band. The integrated LNA delivers excellent sensitivity. An innovative architecture enables an AGC control range of more than 90 dB. The programmable buffered reference frequency output enables crystal sharing with the demodulator.
APPLICATIONS
* * * * * * Digital terrestrial reception Analog and digital PC-TV Digital terrestrial set-top boxes Portable TV receivers TV Plug-in modules Multi-standard PCTV receivers
FEATURES
* * * * 48 MHz to 1002 MHz input frequency range Supports off-air terrestrial and cable reception No active external components required Standard IF output works seamlessly with analog and digital demodulators Low-power 1 W dual-conversion architecture with additional power saving modes Integrated RF pre-filter and first IF filter Single-ended RF input Alignment free Integrated power detector for closed loop RF AGC Integrated IF variable gain amplifier for direct connection to digital demodulators Fully compatible with ATSC, DVB-T, DMB-T, ISDB-T, QAM/ DVB-C, NTSC, PAL, SECAM and other terrestrial television standards Capable of driving cascaded SAW filters with a built-in fixed gain IF buffer amplifier Can drive two IF SAW filters in parallel for hybrid analog/digital applications 48 pin, 7 mm x 7 mm QFN package
PRELIMINARY
*
* * * * *
*
*
*
*
MT2063 SINGL E-C HIP UN IVER SAL TU NER
PRELIMINARY PRODUCT BRIEF
RECOMMENDED OPERATING CONDITIONS
PARAMETER Supply voltage Supply voltage ripple Operating junction temperature Serial control clock MIN 3.15 TYP 3.3 MAX 3.45 25 100 400 UNIT V mVp-p C kHz
TUNER ELECTRICAL CHARACTERISTICS
PARAMETER Power Supply Active current RF Signal Path Input frequency range1 Noise figure2 Terminal voltage gain RF AGC range
48 5 42 60 70 -80 -85 -105 50 30 60 2.0 46 30 30 12,18, 24 60 2.0 1002 MHz dB dB dB dBc dBc/Hz dBc/Hz dBc/Hz kHz MHz Vp-p dB dB MHz Vp-p dB 300 mA
MIN
TYP
MAX
UNIT
ABSOLUTE MAXIMUM RATINGS
PARAMETER Supply voltage Storage temperature range Lead-free solder temperature (soldering 5 seconds, x3) Input voltage -0.3 -50 MIN MAX 3.6 +150 +260 VCC +0.3 UNIT V C C V
Image rejection LO phase noise (1 kHz) LO phase noise (10 kHz) LO phase noise (100 kHz) LO step size IF VGA Frequency range Output voltage swing Maximum terminal voltage gain IF AGC range IF Buffer Frequency range Output voltage swing Maximum terminal voltage gain
Notes: 1) in cable reception mode
48
47
46
45
44
43
42
41
40
39
38
37
PRELIMINARY
1 2 3 4 5 6 7 8 9 10 11 12
36 35 34 33
2) in terrestrial reception mode
ANALOGDEMOD
Exposed paddle on package bottom
32 31 30 29 28 27 26
FGA RF INPUT UPC DNC FGA VGA OPTIONAL IFOUTPUT DIGITALDEMOD
25
L01
PLL
L02
PLL
AMP
13 14 15 16 17 18 19 20 21 22 23 24
IFOUTPUT SERIALDATA CLOCK
SRO
SERIAL CONTROL INTERFACE
MT2063 Pin Diagram MT2063 Block Diagram
Microtune, Inc., 2201 10th Street, Plano, TX 75074, USA Tel: +1-972-673-1600, Fax: +1-972-673-1602, E-mail: sales@microtune.com, Web site: www.microtune.com For a detailed list of office locations, sales offices, and sales representatives, visit our web site at www.microtune.com
Microtune believes that the information in this document is accurate and reliable, as of the date of this document. Microtune assumes no responsibility for any consequences arising from the use of this information, nor from any infringement of patents or the rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or other rights of Microtune. The information in this publication replaces and supersedes all information previously supplied, and is subject to change without notice. The customer is responsible for assuring that proper design and operating safeguards are observed to minimize inherent and procedural hazards. Microtune assumes no responsibility for applications assistance or customer product design. The devices described in this document are not authorized for use in medical, life-support equipment, or any other application involving a potential risk of severe property or environmental damage, personal injury, or death without prior express written approval of Microtune. Any such use is understood to be entirely at the user's risk. Microtune is a registered trademark of Microtune, Inc. MicroTuner, MicroStreamer, VideoCaster, DataCaster, ClearTune, and the Microtune logo are trademarks of Microtune, Inc. All other trademarks belong to their respective companies. Microtune's products are protected by one or more of the following U.S. patents: 5,625,325; 5,648,744; 5,717,730; 5,737,035C1; 5,739,730; 5,805,988; 5,847,612; 6,100,761; 6,104,242; 6,163,684; 6,169,569; 6,172,378; 6,177,964; 6,211,745; 6,218,899; 6,268,778; 6,310,387; 6,323,736; 6,355,537; 6,429,502; 6,462,327; 6,535,068; 6,580,313; 6,608,522; 6,631,257; 6,714,776; 6,725,463; 6,744,308; 6,771,124; 6,784,945; 6,804,099; 6,888,406; 6,891,435; 6,906,594; 6,909,886; 6,919,774; 6,920,182; 6,922,556; 6,963,478; 6,973,288; 6,993,310; 7,035,614; 7,039,062; 7,078,960; 7,079,195; 7,119,834; 7,164,899; 7,171,176; 7,184,724; 7,190,942; 7,190,943; 7,242,918; 7,274,410; 7,304,689; 7,304,533; 7,304,393; 7,313,201; D469,742 and additional patents pending or filed. Microtune's products are protected by one or more of the following International patents: United Kingdom: 1532732; Germany: 60313621.4; Netherlands: 1532732; France: 1532732; and additional patents pending or filed. Entire contents Copyright (c) 1996 - 2008 Microtune, Inc. 011108
MT2063 PB-00136 -- Rev 1.1
January 2008

▲Up To Search▲

Price & Availability of MT2063

	To Download MT2063 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .